Step 1. Unpack your
marquee and familarise yourself with the load and carry handles.

Step 2. Lie it down using load handles to ensure you can access the pockets.

Step 3. Unzip the bottom zip and fold back the steel plated base with wheels

Step 4. Stand the unit up and remove the pegs & ropes from the peg pocket as required.

Step 5. Unpack the Roof from the roof pocket and unfold - ready to fit.

Step 6. Now remove the transit bag and place aside out of the way.

Step 7. Move the frame to the CENTRE of where the marquee will be used and pull legs up and out diagonally.

Step 8. Ensure that the frame extends to approx. half extended size at this stage.

Step 8. Now fit the roof, and secure the the corners via the velcro corner fasteners on the legs

Step 9. Ensure the roof is sitting properly on the frame before extending further.

Step 10. Now extend the frame further and latch the top pull fasteners on each corner.Marquee roof is now taut and frame is extended.

Step 11. Now extend the legs via the leg fastening rings, one position at a time - doing a side at a time.

Step 12. Adjust the legs to obtain the desired height of marquee ceiling. Now the base marquee is erected.

Step 13. If you have purchased walls, you now begin by fitting the rear wall first.

Step 14.The rear wall secures to the velcro on the roof valance and velcro tabs on the legs both sides.

Step 15.. Remember to zip the walls together at the leg poles using the marine grade quality zips.

Step 16. Finish the first side wall and secure to the frame.

Step 17. Now fit the next side wall and secure to the frame.

Step 18. To complete the wall fitting, you fit the front wall with doorway to fully enclose your marquee

Step 19a. Now you must secure the marquee. On soft ground, use the pegs supplied and hammer thru the frame feet into the soil.Then use the guy ropes accordingly.

Step 19b. On hard surfaces, use the accesory units such as the 15kg Steel Weight item to secure the frame feet.

Step 19c. A popular choice on hard surfaces is the sand filled Weight bag, thal also applies 15kg of downforce.

Step 20. Now to finalise setup, you can adjust the windows as you require for ventilation.

Step 21. If you have multiple marquee's together, you now install the leg clamps and gutters to secure the structures together.